Clear Ethernet-Switching Layer2-Protocol-Tunneling Error - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

clear ethernet-switching layer2-protocol-tunneling error

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
clear clear
ethernet-switching ethernet-switching
layer2-protocol-tunneling layer2-protocol-tunneling
error error
clear
ethernet-switching
layer2-protocol-tunneling
error interface
ge-0/1/1.0
1226
clear ethernet-switching layer2-protocol-tunneling error
<interface interface-name>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Clear Layer 2 protocol tunneling (L2PT) errors on one or more interfaces. If an interface
has been disabled because the amount of Layer 2 protocol traffic exceeded the
shutdown-threshold or because the switch has detected an error in the network topology
or configuration, use this command to reenable the interface.
—Clears L2PT errors on all interfaces.
none
—(Optional) Clear L2PT errors on the specified interface.
interface interface-name
view
Example: Configuring Layer 2 Protocol Tunneling on J-EX Series Switches on page 1126
Configuring Layer 2 Protocol Tunneling on J-EX Series Switches (CLI Procedure) on
page 1150
clear ethernet-switching layer2-protocol-tunneling error on page 1226
clear ethernet-switching layer2-protocol-tunneling error interface ge-0/1/1.0 on page 1226
user@switch> clear ethernet-switching layer2-protocol-tunneling error
user@switch> clear ethernet-switching layer2-protocol-tunneling error interface ge-0/1/1.0