Speed - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

speed

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
982
speed (auto-negotiation | speed) ;
[edit interfaces interface-name ether-options]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Configure the interface's speed.
If the statement at the
auto-negotiation
hierarchy level is enabled, the
auto-negotiation —Automatically negotiate the speed based on the speed of the other
end of the link. This option is available only when the
the
[edit interfaces interface-name ether-options]
speed —Specify the interface speed. If the
interfaces interface-name ether-options]
a specific value. This value sets the speed that is used on the link. If the
statement is enabled, you might want to configure a specific speed value to advertise
the desired speed to the remote end.
—10 Mbps
10m
100m —100 Mbps
—1 Gbps
1g
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 919
Configuring Gigabit Ethernet Interfaces (J-Web Procedure) on page 909
Junos OS Network Interfaces Configuration Guide at
http://www.juniper.net/techpubs/software/junos/
[edit interfaces interface-name ether-options]
option is enabled by default.
auto-negotiation
hierarchy level is enabled.
auto-negotiation
hierarchy level is disabled, you must specify
auto-negotiation statement at
statement at the [edit
auto-negotiation