Dell PowerConnect J-EX4200-24T Software Manual page 1039

Description
Options
Table 131: Interface Types and Their Supported Protocol Families
Interface Typ Description
Aggregated Ethernet interface
ae
(also referred to as a link
aggregation group [LAG])
Gigabit Ethernet interface
ge
Loopback interface
lo0
Management Ethernet interface
me0
Routed VLAN interface (RVI)
vlan
Virtual management Ethernet
vme
interface
xe 10-Gigabit Ethernet interface
interface-range Interface-range configuration
Required Privilege
Level
Configure interfaces on J-EX Series switches.
Most standard Junos OS configuration statements are available in Junos OS for J-EX
Series switches. This topic lists standard Junos OS statements that you commonly use
when configuring interfaces on J-EX Series switches as well as statements that are used
to configure only switch interfaces; it does not list all of the possible interface configuration
statements for each interface.
For information about additional standard Junos OS statements that you can configure
on interfaces, see the Junos OS Network Interfaces Configuration Guide at
http://www.juniper.net/techpubs/software/junos/
See Table 131 on page 967 for the interface types and protocol-family options supported
on the switch. Different protocol families support different subsets of the interface
types on the switch. See the
supported for switch interfaces.
Not all interface types support all
supported substatements for a particular protocol family configuration.
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Chapter 55: Configuration Statements for Interfaces
.
statement for syntax of the protocol families
family
substatements. Check your switch CLI for
family
Supported Protocol Families
ccc e t h e r n e t - s w i t c h i n g inet
Supported protocol families are the ones supported by the interface
types that compose the range.
inet6 iso mpls
967