Reset Dot1X Guest-Vsi - HP FlexNetwork 7500 Series Command Reference Manual

Predefined user roles
network-admin
mdc-admin
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
mac-address mac-address: Specifies the MAC address of an 802.1X user in the guest VLAN. If you
do not specify this option, the command removes all 802.1X users from the 802.1X guest VLAN on
the port.
Examples
# Remove the 802.1X user with MAC address 1-1-1 from the 802.1X guest VLAN on
Ten-GigabitEthernet 1/0/1.
<Sysname> reset dot1x guest-vlan interface ten-gigabitethernet 1/0/1 mac-address 1-1-1
Related commands
dot1x guest-vlan

reset dot1x guest-vsi

Use reset dot1x guest-vsi to remove users from the 802.1X guest VSI on a port.
Syntax
reset dot1x guest-vsi interface interface-type interface-number [ mac-address mac-address ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
mac-address mac-address: Specifies the MAC address of an 802.1X user in the guest VSI. If you
do not specify this option, the command removes all 802.1X users from the 802.1X guest VSI on the
port.
Examples
# Remove the 802.1X user with MAC address 1-1-1 from the 802.1X guest VSI on
Ten-GigabitEthernet 1/0/1.
<Sysname> reset dot1x guest-vsi interface ten-gigabitethernet 1/0/1 mac-address 1-1-1
Related commands
dot1x guest-vsi
reset dot1x statistics
Use reset dot1x statistics to clear 802.1X statistics.
Syntax
reset dot1x statistics [ interface interface-type interface-number ]
201