Display Attack-Defense Scan Victim Ipv6 - HP FlexNetwork 7500 Series Command Reference Manual

Usage guidelines
If you do not specify any parameters, this command displays information about all IPv4 scanning
attack victims.
Examples
# (In standalone mode.) Display information about all IPv4 scanning attack victims.
<Sysname> display attack-defense scan victim ip
Slot 1:
IP address
192.168.24.82
Slot 2:
IP address
# (In standalone mode.) Display the number of IPv4 scanning attack victims.
<Sysname> display attack-defense scan victim ip count
Slot 1:
Totally 1 victim IP addresses.
Slot 2:
Totally 0 victim IP addresses.
Table 82 Command output
Field
Totally 1 victim IP addresses
IP address
VPN instance
Detected on
Duration(min)
Related commands
display attack-defense scan attacker ip
scan detect

display attack-defense scan victim ipv6

Use display attack-defense scan victim ipv6 to display information about IPv6 scanning attack
victims.
Syntax
In standalone mode:
display attack-defense scan victim ipv6 [ [ local ] [ slot slot-number ] ] [ count ]
In IRF mode:
display attack-defense scan victim ipv6 [ [ local ] [ chassis chassis-number slot slot-number ] ]
[ count ]
Views
Any view
VPN instance
--
VPN instance
Description
Total number of IPv4 scanning attack victims.
IPv4 address of the victim.
MPLS L3VPN instance to which the victim IPv4 address belongs. If the
victim IPv4 address is on the public network, this field displays hyphens
(--).
Where the attack is detected: the device (Local).
The amount of time the attack lasts, in minutes.
Detected on
Local
Detected on
548
Duration(min)
782
Duration(min)