Mac-Authentication Guest-Vsi - HP FlexNetwork 7500 Series Command Reference Manual

Related commands
display mac-authentication
mac-authentication guest-vlan

mac-authentication guest-vsi

Use mac-authentication guest-vsi to configure a MAC authentication guest VSI on a port.
Use undo mac-authentication guest-vsi to restore the default.
Syntax
mac-authentication guest-vsi guest-vsi-name
undo mac-authentication guest-vsi
Default
No MAC authentication guest VSI exists on a port.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Parameters
guest-vsi-name: Specifies the name of the MAC authentication guest VSI on the port, a
case-sensitive string of 1 to 31 characters.
Usage guidelines
The MAC authentication guest VSI accommodates users that have failed MAC authentication for any
reason other than server unreachable. For example, the VSI accommodates users with invalid
passwords entered. You can deploy a limited set of network resources in the VXLAN that is
associated with the guest VSI. For example, a software server for downloading software and system
patches.
You can configure only one MAC authentication guest VSI on a port. The MAC authentication guest
VSIs on different ports can be different.
On a port, the MAC authentication guest VSI configuration is mutually exclusive with the MAC
authentication guest VLAN and MAC authentication critical VLAN settings.
Examples
# Configure VSI vpna as the MAC authentication guest VSI on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] mac-authentication guest-vsi vpna
Related commands
display mac-authentication
reset mac-authentication guest-vsi
218