Table of Contents
Advertisement
sftp
Use sftp to establish a connection to an IPv4 SFTP server and enter SFTP client view.
Syntax
In non-FIPS mode:
sftp server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key { dsa |
ecdsa-sha2-nistp256 | ecdsa-sha2-nistp384 | rsa | { x509v3-ecdsa-sha2-nistp256 |
x509v3-ecdsa-sha2-nistp384 } pki-domain domain-name } | prefer-compress zlib |
prefer-ctos-cipher { 3des-cbc | aes128-cbc | aes128-ctr | aes128-gcm | aes192-ctr | aes256-cbc
| aes256-ctr | aes256-gcm | des-cbc } | prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 |
sha2-256 | sha2-512 } | prefer-kex { dh-group-exchange-sha1 | dh-group1-sha1 |
dh-group14-sha1 | ecdh-sha2-nistp256 | ecdh-sha2-nistp384 } | prefer-stoc-cipher { 3des-cbc |
aes128-cbc | aes128-ctr | aes128-gcm | aes192-ctr | aes256-cbc | aes256-ctr | aes256-gcm |
des-cbc } | prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 | sha2-256 | sha2-512 } ] * [ dscp
dscp-value | { public-key keyname | server-pki-domain domain-name } | source { interface
interface-type interface-number | ip ip-address } ] *
In FIPS mode:
sftp
server
{ ecdsa-sha2-nistp256 | ecdsa-sha2-nistp384 | rsa | { x509v3-ecdsa-sha2-nistp256 |
x509v3-ecdsa-sha2-nistp384 } pki-domain domain-name } | prefer-compress zlib |
prefer-ctos-cipher { aes128-cbc | aes128-ctr | aes128-gcm | aes192-ctr | aes256-cbc |
aes256-ctr | aes256-gcm } | prefer-ctos-hmac { sha1 | sha1-96 | sha2-256 | sha2-512 } |
prefer-kex { dh-group14-sha1 | ecdh-sha2-nistp256 | ecdh-sha2-nistp384 } | prefer-stoc-cipher
{ aes128-cbc | aes128-ctr | aes128-gcm | aes192-ctr | aes256-cbc | aes256-ctr | aes256-gcm } |
prefer-stoc-hmac { sha1 | sha1-96 | sha2-256 | sha2-512 } ] * [ { public-key keyname |
server-pki-domain domain-name } | source { interface interface-type interface-number | ip
ip-address } ] *
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
server: Specifies a server by its IPv4 address or host name, a case-insensitive string of 1 to 253
characters.
port-number: Specifies the port number of the server, in the range of 1 to 65535. The default is 22.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the server belongs.
The vpn-instance-name argument represents the VPN instance name, a case-sensitive string of 1 to
31 characters.
identity-key: Specifies a public key algorithm for publickey authentication of the client. The default is
dsa in non-FIPS mode and is rsa in FIPS mode. If the server uses publickey authentication, you
must specify this keyword. The client generates the digital signature or certificate by using the local
private key that is associated with the specified algorithm.
•
dsa: Specifies the public key algorithm dsa.
•
ecdsa-sha2-nistp256: Specifies the ECDSA algorithm with 256-bit key strength.
•
ecdsa-sha2-nistp384: Specifies the ECDSA algorithm with 384-bit key strength.
•
rsa: Specifies the public key algorithm rsa.
[
port-number
]
[
vpn-instance
vpn-instance-name
478
]
[
identity-key
Advertisement
Table of Contents
