Ssh Server Enable - HP FlexNetwork 7500 Series Command Reference Manual

[Sysname] ssh server dscp 30

ssh server enable

Use ssh server enable to enable the Stelnet server.
Use undo ssh server enable to disable the Stelnet server.
Syntax
ssh server enable
undo ssh server enable
Default
The Stelnet server is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Examples
# Enable the Stelnet server.
<Sysname> system-view
[Sysname] ssh server enable
Related commands
display ssh server
ssh server ipv6 acl
Use ssh server ipv6 acl to specify an ACL to control IPv6 SSH connections to the server.
Use undo ssh server ipv6 acl to restore the default.
Syntax
ssh server ipv6 acl { ipv6 { advanced-acl-number | basic-acl-number } | mac mac-acl-number }
undo ssh server ipv6 acl
Default
No ACLs are specified and all IPv6 SSH clients can initiate SSH connections to the server.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
ipv6: Specifies the IPv6 ACL type.
advanced-acl-number: Specifies an IPv6 advanced ACL number in the range of 3000 to 3999.
basic-acl-number: Specifies an IPv6 basic ACL number in the range of 2000 to 2999.
450