Accounting Lan-Access - HP FlexNetwork 7500 Series Command Reference Manual

Use undo accounting dual-stack to restore the default.
Syntax
accounting dual-stack { merge | separate }
undo accounting dual-stack
Default
The merge method applies.
Views
ISP domain view
Predefined user roles
network-admin
mdc-admin
Parameters
merge: Merges IPv4 data with IPv6 data for accounting.
separate: Separates IPv4 data from IPv6 data for accounting.
Usage guidelines
If the charging rates are different for IPv4 and IPv6 data, use the separate method for the accounting
of dual-stack users.
Examples
# In ISP domain test, configure the device to separate IPv4 data from IPv6 data for the accounting of
dual-stack users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting dual-stack separate

accounting lan-access

Use accounting lan-access to specify accounting methods for LAN users.
Use undo accounting lan-access to restore the default.
Syntax
In non-FIPS mode:
accounting lan-access { broadcast radius-scheme radius-scheme-name1 radius-scheme
radius-scheme-name2 [ local ] [ none ] | local [ none ] | none | radius-scheme
radius-scheme-name [ local ] [ none ] }
undo accounting lan-access
In FIPS mode:
accounting lan-access { broadcast radius-scheme radius-scheme-name1 radius-scheme
radius-scheme-name2 [ local ] | local | radius-scheme radius-scheme-name [ local ] }
undo accounting lan-access
Default
The default accounting methods of the ISP domain are used for LAN users.
Views
ISP domain view
5