Table 29 Command output
Field
Type
Portal Web server
URL
URL parameters
VPN instance
Server detection
IPv4 status
IPv6 status
Captive-bypass
If-match
Related commands
portal enable
portal web-server
server-detect (portal Web server view)
display web-redirect rule
Use display web-redirect rule to display information about Web redirect rules.
Syntax
In standalone mode:
display web-redirect rule interface interface-type interface-number [ slot slot-number ]
In IRF mode:
display web-redirect rule interface interface-type interface-number [ chassis chassis-number
slot slot-number ]
Views
Any view
Description
Portal Web server type. This field always displays IMC, which indicates the IMC
server.
Name of the portal Web server.
URL of the portal Web server.
URL parameters for the portal Web server.
Name of the MPLS L3VPN where the portal Web server resides.
Parameters for portal Web server detection:
•
Detection interval in seconds.
•
Maximum number of detection attempts.
•
Actions (log and trap) triggered by the reachability status change of the portal
Web server.
Current state of the IPv4 portal Web server:
•
Up—This value indicates one of the following conditions:
Portal Web server detection is disabled.
Portal Web server detection is enabled and the server is reachable.
•
Down—Portal Web server detection is enabled and the server is unreachable.
Current state of the IPv6 portal Web server:
•
Up—This value indicates one of the following conditions:
Portal Web server detection is disabled.
Portal Web server detection is enabled and the server is reachable.
•
Down—Portal Web server detection is enabled and the server is unreachable.
This field is not supported in the current software version.
Status of the captive-bypass feature: Enabled or Disabled.
Match rules configured for URL redirection. If no match rules are configured, this
field displays Not configured.
255