Table of Contents
Advertisement
Related commands
portal mac-trigger-server
portal apply web-server (interface view)
Use portal [ ipv6 ] apply web-server to specify a portal Web server. The device redirects the HTTP
requests sent by unauthenticated portal users to the portal Web server.
Use undo portal [ ipv6 ] apply web-server to restore the default.
Syntax
portal [ ipv6 ] apply web-server server-name [ fail-permit ]
undo portal [ ipv6 ] apply web-server
Default
No portal Web server is specified.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
ipv6: Specifies an IPv6 portal Web server. If the server is an IPv4 portal Web server, do not specify
this keyword.
server-name: Specifies a portal Web server by its name, a case-sensitive string of 1 to 32 characters.
The name must already exist.
fail-permit: Enables the portal fail-permit feature on the interface. The portal fail-permit feature
allows portal users to access the Internet without authentication when the portal Web server is
unreachable.
Usage guidelines
You can enable both IPv4 and IPv6 portal authentication on an interface. Therefore, you can specify
both an IPv4 portal Web server and an IPv6 portal Web server on the interface.
When portal fail-permit is enabled for a portal authentication server and a portal Web server on the
interface, portal authentication is disabled for users on the interface if either server is unreachable.
Portal authentication resumes after both servers become reachable.
Examples
# Specify portal Web server wbs on VLAN-interface 100 for portal authentication.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname–Vlan-interface100] portal apply web-server wbs
Related commands
display portal
portal fail-permit server
portal web-server
267
Advertisement
Table of Contents
