Nas-Id Bind Vlan - HP FlexNetwork 7500 Series Command Reference Manual

Examples
# Specify ISP domain test to accommodate users that are assigned to nonexistent domains.
<Sysname> system-view
[Sysname] domain if-unknown test
Related commands
display domain

nas-id bind vlan

Use nas-id bind vlan to bind a NAS-ID with a VLAN.
Use undo nas-id bind vlan to remove a NAS-ID and VLAN binding.
Syntax
nas-id nas-identifier bind vlan vlan-id
undo nas-id nas-identifier bind vlan vlan-id
Default
No NAS-ID and VLAN bindings exist.
Views
NAS-ID profile view
Predefined user roles
network-admin
mdc-admin
Parameters
nas-identifier: Specifies a NAS-ID, a case-sensitive string of 1 to 31 characters.
vlan-id: Specifies a VLAN ID in the range of 1 to 4094.
Usage guidelines
You can configure multiple NAS-ID and VLAN bindings in a NAS-ID profile.
A NAS-ID can be bound with more than one VLAN, but a VLAN can be bound with only one NAS-ID.
If you configure multiple bindings for the same VLAN, the most recent configuration takes effect.
Examples
# Bind NAS-ID 222 with VLAN 2 in NAS-ID profile aaa.
<Sysname> system-view
[Sysname] aaa nas-id profile aaa
[Sysname-nas-id-prof-aaa] nas-id 222 bind vlan 2
Related commands
aaa nas-id profile
service-type (ISP domain view)
Use service-type to specify the service type for users in an ISP domain.
Use undo service-type to restore the default.
33