Display Ssh Server - HP FlexNetwork 7500 Series Command Reference Manual

SSH commands
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see Security Configuration Guide.
SSH server commands

display ssh server

Use display ssh server on an SSH server to display the SSH server status or sessions.
Syntax
display ssh server { session | status }
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
session: Specifies the SSH server sessions.
status: Specifies the SSH server status.
Examples
# Display the SSH server status.
<Sysname> display ssh server status
Stelnet server: Disable
SSH version : 2.0
SSH authentication-timeout : 60 second(s)
SSH server key generating interval : 0 hour(s)
SSH authentication retries : 3 time(s)
SFTP server: Disable
SFTP server Idle-Timeout: 10 minute(s)
NETCONF server: Disable
SCP server: Disable
SSH Server PKI domain name: aaa
Table 59 Command output
Field
Stelnet server
SSH version
Description
Whether the Stelnet server is enabled.
SSH protocol version.
When the SSH supports SSH1, the protocol version is 1.99.
Otherwise, the protocol version is 2.
440