Table of Contents
Advertisement
Examples
# In RADIUS scheme radius1, set the RADIUS server response timeout timer to 5 seconds.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer response-timeout 5
Related commands
display radius scheme
retry
user-name-format (RADIUS scheme view)
Use user-name-format to specify the format of the username to be sent to a RADIUS server.
Use undo user-name-format to restore the default.
Syntax
user-name-format { keep-original | with-domain | without-domain }
undo user-name-format
Default
The ISP domain name is included in the usernames sent to a RADIUS server.
Views
RADIUS scheme view
Predefined user roles
network-admin
mdc-admin
Parameters
keep-original: Sends the username to the RADIUS server as the username is entered.
with-domain: Includes the ISP domain name in the username sent to the RADIUS server.
without-domain: Excludes the ISP domain name from the username sent to the RADIUS server.
Usage guidelines
A username is generally in the userid@isp-name format, of which the isp-name argument is used by
the device to determine the ISP domain to which a user belongs. Some earlier RADIUS servers,
however, cannot recognize a username containing an ISP domain name. Before sending a
username including a domain name to such a RADIUS server, the device must remove the domain
name. This command allows you to specify whether to include a domain name in a username sent to
a RADIUS server.
If a RADIUS scheme defines that the username is sent without the ISP domain name, do not apply
the scheme to more than one ISP domain. Otherwise, the RADIUS server will consider two users in
different ISP domains but with the same userid as one user.
For 802.1X users using EAP authentication, the user-name-format command configured for a
RADIUS scheme does not take effect. The device does not change the usernames from clients
before forwarding them to the RADIUS server.
Examples
# In RADIUS scheme radius1, configure the device to remove the domain name from the
usernames sent to the RADIUS servers.
<Sysname> system-view
114
Advertisement
Table of Contents
