Dot1X Domain-Delimiter - HP FlexNetwork 7500 Series Command Reference Manual

•
The port is configured with the voice VLAN.
To configure a voice VLAN on a port, use the voice-vlan enable command (see Layer 2—LAN
Switching Command Reference).
•
LLDP is enabled both globally and on the port.
The device uses LLDP to identify voice users. For information about LLDP commands, see
Layer 2—LAN Switching Command Reference.
Examples
# Enable the 802.1X critical voice VLAN on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x critical-voice-vlan
Related commands
display dot1x
lldp enable (Layer 2—LAN Switching Command Reference)
lldp global enable (Layer 2—LAN Switching Command Reference)
voice-vlan enable (Layer 2—LAN Switching Command Reference)

dot1x domain-delimiter

Use dot1x domain-delimiter to specify a set of domain name delimiters supported by the device.
Use undo dot1x domain-delimiter to restore the default.
Syntax
dot1x domain-delimiter string
undo dot1x domain-delimiter
Default
The device supports only the at sign (@) delimiter for 802.1X users.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
string: Specifies a set of 1 to 16 domain name delimiters for 802.1X users. No space is required
between delimiters. Available delimiters include the at sign (@), backslash (\), dot (.), and forward
slash (/). If you want to use backslash (\) as the domain name delimiter, you must enter the escape
character (\) along with the backslash (\) sign.
Usage guidelines
Any character in the configured set can be used as the domain name delimiter for 802.1X
authentication users. Usernames that include domain names can use the format of
username@domain-name,
username/domain-name.
The delimiter set you configured overrides the default setting. If the at sign (@) is not included in the
delimiter set, the device does not support the 802.1X users that use this sign as the domain name
delimiter.
domain-name\username,
177
username.domain-name, or