Table of Contents
Advertisement
AAA commands
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see Security Configuration Guide.
General AAA commands
aaa nas-id profile
Use aaa nas-id profile to create a NAS-ID profile and enter its view, or enter the view of an existing
NAS-ID profile.
Use undo aaa nas-id profile to delete a NAS-ID profile.
Syntax
aaa nas-id profile profile-name
undo aaa nas-id profile profile-name
Default
No NAS-ID profiles exist. The device uses the device name (set by using the sysname command)
as the NAS-ID.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
profile-name: Specifies the NAS-ID profile name, a case-insensitive string of 1 to 31 characters.
Usage guidelines
Configure a NAS-ID profile to maintain NAS-ID and VLAN bindings on the device.
During RADIUS authentication, the device uses a NAS-ID to set the NAS-Identifier attribute of
RADIUS packets so that the RADIUS server can identify the access location of users.
Examples
# Create a NAS-ID profile named aaa and enter its view.
<Sysname> system-view
[Sysname] aaa nas-id profile aaa
[Sysname-nas-id-prof-aaa]
Related commands
nas-id bind vlan
port-security nas-id-profile
portal nas-id-profile
1
Advertisement
Table of Contents
