Predefined user roles
network-admin
mdc-admin
Parameters
1: Uses format 1 for the NAS-Port-Id attribute.
2: Uses format 2 for the NAS-Port-Id attribute.
3: Uses format 3 for the NAS-Port-Id attribute.
4: Uses format 4 for the NAS-Port-Id attribute.
Usage guidelines
The NAS-Port-Id format supported by RADIUS servers varies by vendor. Use this command to
specify the format of the NAS-Port-Id attribute in the RADIUS packets sent for portal users to the
RADIUS server. The device then automatically constructs a value for the NAS-Port-Id attribute in the
specified format to meet the RADIUS server requirements.
Format 1 contains three space-separated strings: interface-type port-location access-node-id.
Spaces are not allowed within a string.
•
The interface-type string specifies the interface type of the NAS port. Available options include:
atm—ATM interface.
eth—Common Ethernet interface.
trunk—Ethernet trunk interface.
0—The interface type information will be reported by the access node to the BRAS.
•
The port-location string represents the location of the access line on the BRAS. Its format is
NAS_slot/NAS_subslot/NAS_port:XPI.XCI.
Field
NAS_slot
NAS_subslot
NAS_Port
XPI.XCI
For the access node to report its access line information to the BRAS, all fields will be set to 0s
except for the XPI and XCI fields.
•
The access-node-id string specifies the attributes the of BRAS. Its format is
AccessNodeIdentifier/ANI_rack/ANI_frame/ANI_slot/ANI_subslot/ANI_port:ANI_XPI.ANI_XCI,
in which the :ANI_XPI.ANI_XCI portion is optional.
AccessNodeIdentifier
ANI_rack
Description
Slot number of the BRAS, in the range of 0 to 31.
Subslot number of the BRAS, in the range of 0 to 31.
Port number of the BRAS, in the range of 0 to 63.
For ATM interfaces:
•
XPI is VPI in the range of 0 to 255.
•
XCI is VCI in the range of 0 to 65535.
For Ethernet interfaces or Ethernet trunk interfaces:
•
XPI is PVLAN in the range of 0 to 4095. This field is
set to 4096 if there is no PVLAN.
•
XCI is CVLAN in the range of 0 to 4095. This field is
set to 4096 if the user is not assigned to a VLAN as in
the situation where the end user device is directly
connected to a BRAS port.
Identifier description of the access node, a string not
longer than 50 characters without spaces.
Rack number of the access node, in the range of 0 to 15.
286