Table of Contents
Advertisement
Usage guidelines
You can configure multiple URL parameters.
If you execute this command multiple times to configure the same URL parameter, the most recent
configuration takes effect.
After you configure the URL parameters, the access device sends the portal Web server URL with
these parameters to portal users. For example, assume that the URL of a portal Web server is
http://www.test.com/portal, and you execute the url-parameter userip source-address and
url-parameter userurl value http://www.abc.com/welcome commands. Then, the access device
sends
to
http://www.test.com/portal?userip=1.1.1.1&userurl=http://www.abc.com/welcome.
When you configure the param-name argument in this command, you must use the URL parameter
name supported by the actual portal server. Different portal server types support different URL
parameter names.
For example, the IMC server supports parameter names userurl, userip, and usermac for the
keywords original-url, source-address, and source-mac, respectively. To carry the user IP
information in the portal Web server URL, you must configure the parameter name as userip and
specify the source-address keyword.
If you specify the encryption algorithm for a parameter, the redirection URL carries the encrypted
value for the parameter. Execute the url-parameter usermac source-mac encryption des key
simple 12345678 command. Then the access device sends to the user with MAC address
1111-1111-1111
http://www.test.com/portal?usermac=xxxxxxxxx&userip=1.1.1.1&userurl=http://www.test.co
m/welcome, where xxxxxxxxx represents the encrypted user MAC address.
Examples
# Configure URL parameters userip and userurl for the portal Web server wbs. Configure the value
of the userip parameter as source-address (the IP addresses of users) and that of the userurl
parameter as http://www.abc.com/welcome.
<Sysname> system-view
[Sysname] portal web-server wbs
[Sysname-portal-websvr-wbs] url-parameter userip source-address
[Sysname-portal-websvr-wbs] url-parameter userurl value http://www.abc.com/welcome
# Configure URL parameter usermac for the portal Web server wbs. Configure the value of the
usermac parameter as source-mac (the MAC addresses of users) and specify DES to encrypt the
MAC addresses.
<Sysname> system-view
[Sysname] portal web-server wbs
[Sysname-portal-websvr-wbs] url-parameter usermac source-mac encryption des key simple
12345678
Related commands
display portal web-server
url
user-sync
Use user-sync to enable portal user synchronization for a portal authentication server.
Use undo user-sync to disable portal user synchronization for a portal authentication server.
Syntax
user-sync timeout timeout
the
user
whose
IP
address
the
304
is
1.1.1.1
the
URL
URL
Advertisement
Table of Contents
