Portal Ipv6 Free-All Except Destination - HP FlexNetwork 7500 Series Command Reference Manual

Hide thumbs Also See for FlexNetwork 7500 Series:
Table of Contents

Advertisement

Examples
# Configure source-based portal-free rule: specify the rule number as 3, source MAC address as
1-1-1, and source VLAN ID as 10. This rule allows the portal user whose source MAC address is
1-1-1 from VLAN 10 to access network resources without authentication.
<Sysname> system-view
[Sysname] portal free-rule 3 source mac 1-1-1 vlan 10
Related commands
display portal rule

portal ipv6 free-all except destination

Use portal ipv6 free-all except destination to configure an IPv6 portal authentication destination
subnet on an interface.
Use undo portal ipv6 free-all except destination to delete IPv6 portal authentication destination
subnets on the interface.
Syntax
portal ipv6 free-all except destination ipv6-network-address prefix-length
undo portal ipv6 free-all except destination [ ipv6-network-address ]
Default
No IPv6 portal authentication destination subnet is configured. Portal users must pass portal
authentication to access any IPv6 subnet.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
ipv6-network-address: Specifies an IPv6 portal authentication destination subnet.
prefix-length: Specifies the prefix length of the IPv6 subnet, in the range of 0 to 128.
Usage guidelines
Portal users on the interface are authenticated when accessing the specified authentication
destination subnet (except IP addresses and subnets specified in portal-free rules). The users can
access other subnets without portal authentication.
You can configure multiple authentication destination subnets.
If you do not specify the ipv6-network-address argument in the undo portal ipv6 free-all except
destination command, this command deletes all IPv6 portal authentication destination subnets on
the interface.
Re-DHCP authentication does not support authentication destination subnets.
If you configure both an authentication source subnet and an authentication destination subnet on an
interface, only the authentication destination subnet takes effect.
Examples
# Configure an IPv6 portal authentication destination subnet of 1::2/16 on VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
277

Advertisement

Table of Contents
loading

Table of Contents