Icmp-Flood Action - HP FlexNetwork 7500 Series Command Reference Manual

icmp-flood action

Use icmp-flood action to specify global actions against ICMP flood attacks.
Use undo icmp-flood action to restore the default.
Syntax
icmp-flood action { drop | logging } *
undo icmp-flood action
Default
No global action is specified for ICMP flood attacks.
Views
Attack defense policy view
Predefined user roles
network-admin
mdc-admin
Parameters
drop: Drops subsequent ICMP packets destined for the victim IP addresses.
logging: Enables logging for ICMP flood attack events.
Examples
# Specify drop as the global action against ICMP flood attacks in attack defense policy atk-policy-1.
<Sysname> system-view
[Sysname] attack-defense policy atk-policy-1
[Sysname-attack-defense-policy-atk-policy-1] icmp-flood action drop
Related commands
icmp-flood detect non-specific
icmp-flood detect ip
icmp-flood threshold
icmp-flood detect ip
Use icmp-flood detect ip to configure IP address-specific ICMP flood attack detection.
Use undo icmp-flood detect ip to remove the IP address-specific ICMP flood attack detection
configuration.
Syntax
icmp-flood detect ip ip-address [ vpn-instance vpn-instance-name ] [ threshold threshold-value ]
[ action { { drop | logging } * | none } ]
undo icmp-flood detect ip ip-address [ vpn-instance vpn-instance-name ]
Default
IP address-specific ICMP flood attack detection is not configured.
Views
Attack defense policy view
570