Radius-Server Client - HP FlexNetwork 7500 Series Command Reference Manual

Syntax
radius-server activate
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
Use this command to immediately activate the most recent RADIUS server configuration after you
have added, modified, or deleted RADIUS clients and network access users from which RADIUS
user data is generated.
Executing this command restarts the RADIUS server process and an authentication service
interruption will occur during the restart.
Examples
# Activate the RADIUS server configuration.
<Sysname> system-view
[Sysname] radius-server activate
Related commands
display radius-server active-client
display radius-server active-user

radius-server client

Use radius-server client to configure a RADIUS client.
Use undo radius-server client to delete a RADIUS client.
Syntax
radius-server client ip ipv4-address key { cipher | simple } string
undo radius-server client { all | ip ipv4-address }
Default
No RADIUS clients are specified.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
ip ipv4-address: Specifies the IPv4 address of the RADIUS client, which must be a Class A, B, or C
address and the first octet cannot be 0 or 127.
key: Specifies the shared key to communicate with the RADIUS client.
cipher: Specifies the key in encrypted form.
simple: Specifies the key in plaintext form.
158