Dot1X Access-User Log Enable - HP FlexNetwork 7500 Series Command Reference Manual

Views
System view
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
For the 802.1X feature to take effect on a port, you must enable the feature both globally and on the
port.
Examples
# Enable 802.1X globally.
<Sysname> system-view
[Sysname] dot1x
# Enable 802.1X on Ten-GigabitEthernet 1/0/1.
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x
[Sysname-Ten-GigabitEthernet1/0/1] quit
Related commands
display dot1x

dot1x access-user log enable

Use dot1x access-user log enable to enable logging for 802.1X users.
Use undo dot1x access-user log enable to disable logging for 802.1X users.
Syntax
dot1x access-user
successful-login ] *
undo dot1x access-user log enable [ abnormal-logoff | failed-login | normal-logoff |
successful-login ] *
Default
Logging for 802.1X users is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
abnormal-logoff: Specifies logs generated for exceptional logoffs of 802.1X users, such as logoffs
caused by realtime accounting failures and reauthentication failures.
failed-login: Specifies logs generated for login failures of 802.1X users.
normal-logoff: Specifies logs generated for logoffs requested by 802.1X users.
log enable [ abnormal-logoff
169
| failed-login | normal-logoff |