Local-Guest Email Sender - HP FlexNetwork 7500 Series Command Reference Manual

Examples
# Configure the subject and body for the email notifications to send to the local guest.
<Sysname> system-view
[Sysname] local-guest email format to guest subject Guest account information
[Sysname] local-guest email format to guest body A guest account has been created for you.
The username, password, and validity period of the account are given below.
Related commands

local-guest email sender

local-guest email smtp-server
local-guest send-email
local-guest email sender
Use local-guest email sender to configure the email sender address in email notifications of local
guests sent by the device.
Use undo local-guest email sender to restore the default.
Syntax
local-guest email sender email-address
undo local-guest email sender
Default
No email sender address is configured for the email notifications of local guests sent by the device.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
email-address: Specifies the email sender address, a case-sensitive string of 1 to 255 characters.
Usage guidelines
If you do not specify the email sender address, the device cannot send email notifications.
The device supports only one email sender address. If you execute this command multiple times, the
most recent configuration takes effect.
Examples
# Specify the email sender address as abc@yyy.com for email notifications of local guests.
<Sysname> system-view
[Sysname] local-guest email sender abc@yyy.com
Related commands
local-guest email format
local-guest email smtp-server
local-guest send-email
50