Portal Max-User - HP FlexNetwork 7500 Series Command Reference Manual

[Sysname-portal-mac-trigger-server-mts]
Related commands
display portal mac-trigger-server
portal apply mac-trigger-server

portal max-user

Use portal max-user to set the maximum number of total portal users allowed in the system.
Use undo portal max-user to restore the default.
Syntax
portal max-user max-number
undo portal max-user
Default
The total number of portal users allowed in the system is not limited.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
max-number: Specifies the maximum number of total portal users in the system. The value range for
this argument is 1 to 4294967295.
Usage guidelines
If you configure the maximum total number smaller than the number of current online portal users on
the device, this command still takes effect. The online users are not affected by this command, but
the system forbids new portal users to log in.
This command sets the maximum number of online IPv4 and IPv6 portal users in all.
Make sure the total number of the maximum IPv4 and IPv6 portal users allowed on all interfaces
does not exceed the system-allowed maximum number. Otherwise, the exceeding portal users will
not be able to log in to the device.
Examples
# Set the maximum number of online portal users allowed in the system to 100.
<Sysname> system-view
[Sysname] portal max-user 100
Related commands
display portal user
portal { ipv4-max-user | ipv6-max-user }
portal nas-id-profile
Use portal nas-id-profile to specify a NAS-ID profile for an interface.
Use undo portal nas-id-profile to restore the default.
284