Reset Dot1X Statistics - HP 6125XLG Command Reference Manual

Examples
# Enable the unicast trigger function on Ten-GigabitEthernet 1/1/6.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/6
[Sysname-Ten-GigabitEthernet1/1/6] dot1x unicast-trigger
Related commands
display dot1x
•
dot1x multicast-trigger
•
dot1x retry
•
• dot1x timer

reset dot1x statistics

Use reset dot1x statistics to clear 802.1X statistics.
Syntax
reset dot1x statistics [ interface interface-type interface-number ]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
If a port is specified, the command clears 802.1X statistics for the port. If no port is specified, the
command clears all 802.1X statistics.
Examples
# Clear 802.1X statistics on Ten-GigabitEthernet 1/1/6.
<Sysname> reset dot1x statistics interface ten-gigabitethernet 1/1/6
Related commands
display dot1x
99