Table of Contents
Advertisement
Table 81 Command output
Field
Totally 1 attackers
IPv6 address
VPN instance
Detected on
Duration(min)
Related commands
display attack-defense scan victim ipv6
scan detect
display attack-defense scan victim ip
Use display attack-defense scan victim ip to display information about IPv4 scanning attack
victims.
Syntax
In standalone mode:
display attack-defense scan victim ip [ [ local ] [ slot slot-number ] ] [ count ]
In IRF mode:
display attack-defense scan victim ip [ [ local ] [ chassis chassis-number slot slot-number ] ]
[ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
local: Specifies the device.
slot slot-number: Specifies a card by its slot number. This option is available only when you specify
the device. If you do not specify a card, this command displays information about IPv4 scanning
attack victims for all cards. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. This option is available only when you specify the
device. If you do not specify a card, this command displays information about IPv4 scanning attack
victims for all cards. (In IRF mode.)
count: Displays the number of matching IPv4 scanning attack victims.
Description
Total number of IPv6 scanning attackers.
IPv6 address of the attacker.
MPLS L3VPN instance to which the attacker IPv6 address belongs. If the
attacker IPv6 address is on the public network, this field displays hyphens
(--).
Where the attack is detected: the device (Local).
The amount of time the attack lasts, in minutes.
547
Advertisement
Table of Contents
