Accounting-On Extended - HP FlexNetwork 7500 Series Command Reference Manual

<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] accounting-on enable interval 5 send 15
Related commands
display radius scheme

accounting-on extended

Use accounting-on extended to enable the extended accounting-on feature.
Use undo accounting-on extended to disable the extended accounting-on feature.
Syntax
accounting-on extended
undo accounting-on extended
Default
The extended accounting-on feature is disabled.
Views
RADIUS scheme view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Usage guidelines
The extended accounting-on feature enhances the accounting-on feature by applying to a distributed
architecture. For the extended accounting-on feature to take effect, the RADIUS server must run on
IMC and the accounting-on feature must be enabled.
The extended accounting-on feature is applicable to LAN users. The user data is saved to the cards
through which the users access the device.
When the extended accounting-on feature is enabled, the device automatically sends an
accounting-on packet to the RADIUS server after a card reboot (device not reboot). The packet
contains the card identifier. Upon receiving the accounting-on packet, the RADIUS server logs out all
online users that access the device through the card.
The device uses the packet retransmission interval and maximum transmission attempts set by
using the accounting-on enable command for this feature.
Execute the save command to ensure that the accounting-on extended command takes effect at
the next card reboot. For information about the save command, see Fundamentals Command
Reference.
Examples
# Enable the extended accounting-on feature for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] accounting-on extended
Related commands
accounting-on enable
68