Dot1X User-Ip Freeze - HP FlexNetwork 7500 Series Command Reference Manual

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x unicast-trigger
Related commands
display dot1x
dot1x multicast-trigger
dot1x retry
dot1x timer

dot1x user-ip freeze

Use dot1x user-ip freeze to enable 802.1X user IP freezing.
Use undo dot1x user-ip freeze to disable 802.1X user IP freezing.
Syntax
dot1x user-ip freeze
undo dot1x user-ip freeze
Default
802.1X user IP freezing is disabled.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This command prevents 802.1X-generated IPSG bindings from being updated because of user IP
changes. For information about IP source guard commands, see "IP source guard commands."
Examples
# Enable 802.1X user IP freezing on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x user-ip freeze
reset dot1x guest-vlan
Use reset dot1x guest-vlan to remove users from the 802.1X guest VLAN on a port.
Syntax
reset dot1x guest-vlan interface interface-type interface-number [ mac-address mac-address ]
Views
User view
200