Table of Contents
Advertisement
Usage guidelines
If you do not specify the server-name argument, this command displays information about all portal
authentication servers.
Examples
# Display information about the portal authentication server pts.
<Sysname> display portal server pts
Portal server: pts
Type
IP
VPN instance
Port
Server detection
User synchronization
Status
Table 26 Command output
Field
Type
Portal server
IP
VPN instance
Port
Server detection
User synchronization
Status
Related commands
portal enable
portal server
server-detect (portal authentication server view)
user-sync
display portal user
Use display portal user to display information about portal users.
: IMC
: 192.168.0.111
: Not configured
: 50100
: Timeout 60s
Action: log, trap
: Timeout 200s
: Up
Description
Portal authentication server type. This field always displays IMC, which indicates
the IMC server.
Name of the portal authentication server.
IP address of the portal authentication server.
MPLS L3VPN instance where the portal authentication server resides.
Listening port on the portal authentication server.
Parameters for portal authentication server detection:
•
Detection timeout in seconds.
•
Actions (log and trap) triggered by the reachability status change of the
portal authentication server.
User idle timeout in seconds for portal user synchronization.
Reachability status of the portal authentication server:
•
Up—This value indicates one of the following conditions:
Portal authentication server detection is disabled.
Portal authentication server detection is enabled and the server is
reachable.
•
Down—Portal authentication server detection is enabled and the server is
unreachable.
247
Advertisement
Table of Contents
