Primary Authentication (Radius Scheme View) - HP FlexNetwork 7500 Series Command Reference Manual

secondary accounting (RADIUS scheme view)
server-load-sharing enable
vpn-instance (RADIUS scheme view)

primary authentication (RADIUS scheme view)

Use primary authentication to specify the primary RADIUS authentication server.
Use undo primary authentication to restore the default.
Syntax
primary authentication { host-name | ipv4-address | ipv6 ipv6-address } [ port-number | key
{ cipher | simple } string | test-profile profile-name | vpn-instance vpn-instance-name | weight
weight-value ] *
undo primary authentication
Default
The primary RADIUS authentication server is not specified.
Views
RADIUS scheme view
Predefined user roles
network-admin
mdc-admin
Parameters
host-name: Specifies the host name of the primary RADIUS authentication server, a case-insensitive
string of 1 to 253 characters.
ipv4-address: Specifies the IPv4 address of the primary RADIUS authentication server.
ipv6 ipv6-address: Specifies the IPv6 address of the primary RADIUS authentication server.
port-number: Specifies the service port number of the primary RADIUS authentication server. The
value range for the UDP port number is 1 to 65535. The default setting is 1812.
key: Specifies the shared key for secure communication with the primary RADIUS authentication
server.
cipher: Specifies the key in encrypted form.
simple: Specifies the key in plaintext form. For security purposes, the key specified in plaintext form
will be stored in encrypted form.
string: Specifies the key. This argument is case sensitive.
•
In non-FIPS mode, the encrypted form of the key is a string of 1 to 117 characters. The plaintext
form of the key is a string of 1 to 64 characters.
•
In FIPS mode, the encrypted form of the key is a string of 15 to 117 characters. The plaintext
form of the key is a string of 15 to 64 characters. The plaintext string must contain digits,
uppercase letters, lowercase letters, and special characters.
test-profile profile-name: Specifies a test profile for detecting the RADIUS server status. The
profile-name argument is a case-sensitive string of 1 to 31 characters.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance to which the primary
RADIUS authentication server belongs. The vpn-instance-name argument is a case-sensitive string
of 1 to 31 characters. If the server is on the public network, do not specify this option.
89