HP FlexNetwork 7500 Series Command Reference Manual page 132

Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a case-insensitive string of
1 to 32 characters. If you do not specify an HWTACACS scheme, this command displays the
configuration of all HWTACACS schemes.
statistics: Displays the HWTACACS service statistics. If you do not specify this keyword, the
command displays the configuration of the specified HWTACACS scheme.
Examples
# Displays the configuration of all HWTACACS schemes.
<Sysname> display hwtacacs scheme
Total 1 HWTACACS schemes
------------------------------------------------------------------
HWTACACS Scheme Name
Index : 0
Primary Auth Server:
Host name: Not configured
IP : 2.2.2.2
VPN Instance: 2
Single-connection: Enabled
Primary Author Server:
Host name: Not configured
IP : 2.2.2.2
VPN Instance: 2
Single-connection: Disabled
Primary Acct Server:
Host name: Not configured
IP : Not Configured
VPN Instance: Not configured
Single-connection: Disabled
VPN Instance
NAS IP Address
Server Quiet Period(minutes)
Realtime Accounting Interval(minutes) : 12
Stop-accounting packets buffering
Retransmission times
Response Timeout Interval(seconds)
Username Format
Data flow unit
Packet unit
------------------------------------------------------------------
: hwtac
Port: 49 State: Active
Port: 49 State: Active
Port: 49 State: Block
: 2
: 2.2.2.3
: 5
: Enabled
: 100
: 5
: with-domain
: Byte
: one
117