Primary Accounting (Radius Scheme View) - HP FlexNetwork 7500 Series Command Reference Manual

Views
RADIUS DAS view
Predefined user roles
network-admin
mdc-admin
Parameters
port-number: Specifies a UDP port number in the range of 1 to 65535.
Usage guidelines
The destination port in DAE packets on the DAC must be the same as the RADIUS DAS port on the
DAS.
Examples
# Enable the RADIUS DAS to listen to UDP port 3790 for DAE requests.
<Sysname> system-view
[Sysname] radius dynamic-author server
[Sysname-radius-da-server] port 3790
Related commands
client
radius dynamic-author server

primary accounting (RADIUS scheme view)

Use primary accounting to specify the primary RADIUS accounting server.
Use undo primary accounting to restore the default.
Syntax
primary accounting { host-name | ipv4-address | ipv6 ipv6-address } [ port-number | key { cipher |
simple } string | vpn-instance vpn-instance-name | weight weight-value ] *
undo primary accounting
Default
The primary RADIUS accounting server is not specified.
Views
RADIUS scheme view
Predefined user roles
network-admin
mdc-admin
Parameters
host-name: Specifies the host name of the primary RADIUS accounting server, a case-insensitive
string of 1 to 253 characters.
ipv4-address: Specifies the IPv4 address of the primary RADIUS accounting server.
ipv6 ipv6-address: Specifies the IPv6 address of the primary RADIUS accounting server.
port-number: Specifies the service port number of the primary RADIUS accounting server. The value
range for the UDP port number is 1 to 65535. The default setting is 1813.
87