Ack-Flood Detect Non-Specific - HP FlexNetwork 7500 Series Command Reference Manual

Default
IP address-specific ACK flood attack detection is not configured.
Views
Attack defense policy view
Predefined user roles
network-admin
mdc-admin
Parameters
ip ipv4-address: Specifies the IPv4 address to be protected. The ip-address argument cannot be all
1s or 0s.
ipv6 ipv6-address: Specifies the IPv6 address to be protected.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the protected IP
address belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters.
Do not specify this option if the protected IP address is on the public network.
threshold threshold-value: Specifies the threshold for triggering ACK flood attack prevention. The
value range is 1 to 1000000 in units of ACK packets sent to the specified IP address per second.
action: Specifies the actions when an ACK flood attack is detected. If no action is specified, the
global actions set by the ack-flood action command apply.
drop: Drops subsequent ACK packets destined for the protected IP address.
logging: Enables logging for ACK flood attack events.
none: Takes no action.
Usage guidelines
With ACK flood attack detection configured for an IP address, the device is in attack detection state.
When the sending rate of ACK packets to the IP address reaches the threshold, the device enters
prevention state and takes the specified actions. When the rate is below the silence threshold
(three-fourths of the threshold), the device returns to the attack detection state.
You can configure ACK flood attack detection for multiple IP addresses in one attack defense policy.
Examples
# Configure ACK flood attack detection for 192.168.1.2 in attack defense policy atk-policy-1.
<Sysname> system-view
[Sysname] attack-defense policy atk-policy-1
[Sysname-attack-defense-policy-atk-policy-1] ack-flood detect ip 192.168.1.2 threshold
2000
Related commands
ack-flood action

ack-flood detect non-specific

ack-flood threshold
ack-flood detect non-specific
Use ack-flood detect non-specific to enable global ACK flood attack detection.
Use undo ack-flood detect non-specific to disable global ACK flood attack detection.
521