Port (Mac Binding Server View) - HP FlexNetwork 7500 Series Command Reference Manual

port (MAC binding server view)

Use port to set the UDP port number the MAC binding server uses to listen for MAC binding query
packets.
Use undo port to restore the default.
Syntax
port port-number
undo port
Default
The MAC binding server listens for MAC binding query packets on UDP port 50100.
Views
MAC binding server view
Predefined user roles
network-admin
mdc-admin
Parameters
port-number: Specifies the listening UDP port number in the range of 1 to 65534.
Usage guidelines
The specified port number must be the same as the query listening port number configured on the
MAC binding server.
Examples
# Set the UDP port number to 1000 for MAC binding server pts to listen for MAC binding query
packets.
<sysname> system-view
[sysname] portal mac-trigger-server mts
[sysname-portal-mac-trigger-server-mts] port 1000
Related commands
display portal mac-trigger-server
port (portal authentication server view)
Use port to set the destination UDP port number used by the device to send unsolicited portal
packets to the portal authentication server.
Use undo port to restore the default.
Syntax
port port-number
undo port
Default
The device uses 50100 as the destination UDP port number for unsolicited portal packets.
Views
Portal authentication server view
263