Port-Security Authorization Ignore - HP FlexNetwork 7500 Series Command Reference Manual

Related commands
display dot1x connection
display mac-authentication connection
port-security authentication open

port-security authorization ignore

Use port-security authorization ignore to configure a port to ignore the authorization information
received from the authentication server (a RADIUS server or the local device).
Use undo port-security authorization ignore to restore the default.
Syntax
port-security authorization ignore
undo port-security authorization ignore
Default
A port uses the authorization information from the server.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
After a user passes RADIUS or local authentication, the server performs authorization based on the
authorization attributes configured for the user account. For example, the server can assign a VLAN.
If you do not want the port to use such authorization attributes for users, use this command to ignore
the authorization information from the server.
Examples
# Configure Ten-GigabitEthernet 1/0/1 to ignore the authorization information from the authentication
server.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] port-security authorization ignore
Related commands
display port-security
port-security authorization-fail offline
Use port-security authorization-fail offline to enable the authorization-fail-offline feature.
Use undo port-security authorization-fail offline to disable the authorization-fail-offline feature.
Syntax
port-security authorization-fail offline [ quiet-period ]
undo port-security authorization-fail offline
316