Pki Certificate Access-Control-Policy - HP FlexNetwork 7500 Series Command Reference Manual

Syntax
pki abort-certificate-request domain domain-name
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
domain-name: Specifies a PKI domain by its name, a case-insensitive string of 1 to 31 characters.
The domain name cannot contain the special characters listed in
Table 50 Special characters
Character name
Tilde
Asterisk
Backslash
Vertical bar
Colon
Usage guidelines
You can abort a certificate request and change some parameters, such as common name, country
code, or FQDN, in the certificate request before the CA issues the certificate. Use the display pki
certificate request-status command to display the certificate request status.
Examples
# Abort the certificate request for PKI domain 1.
<Sysname> system-view
[Sysname] pki abort-certificate-request domain 1
The certificate request is in process.
Confirm to abort it? [Y/N]:y
Related commands
display pki certificate request-status
pki request-certificate domain

pki certificate access-control-policy

Use pki certificate access-control-policy to create a certificate-based access control policy and
enter its view, or enter the view of an existing certificate-based access control policy.
Use undo pki certificate access-control-policy to remove a certificate-based access control
policy.
Syntax
pki certificate access-control-policy policy-name
undo pki certificate access-control-policy policy-name
Symbol
~
*
\
|
:
408
Table 50.
Character name
Dot
Left angle bracket
Right angle bracket
Quotation marks
Apostrophe
Symbol
.
<
>
"
'