Web-Auth Free-Ip - HP FlexNetwork 7500 Series Command Reference Manual

Syntax
web-auth enable apply server server-name
undo web-auth enable
Default
Web authentication is disabled.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Parameters
server-name: Specifies the Web authentication server name, a case-sensitive string of 1 to 32
characters.
User guidelines
Use this command to enable Web authentication on an interface and specify a Web authentication
server.
For Web authentication to operate correctly, do not enable port security or configure the port security
mode on the Layer 2 Ethernet interface enabled with Web authentication.
Examples
# Enable Web authentication and specify Web authentication server wbs on Ten-GigabitEthernet
1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] web-auth enable apply server wbs
Related commands
web-auth server

web-auth free-ip

Use web-auth free-ip to specify a Web authentication-free subnet.
Use undo web-auth free-ip to restore the default.
Syntax
web-auth free-ip ip-address { mask-length | mask }
undo web-auth free-ip { ip-address { mask-length | mask } | all }
Default
No Web-authentication-free subnets exist.
Views
System view
Predefined user roles
network-admin
mdc-admin
706