Reset Radius Statistics - HP FlexNetwork 7500 Series Command Reference Manual

Usage guidelines
You can execute this command multiple times to configure multiple test profiles.
If you specify a nonexistent test profile for a RADIUS server, the device does not detect the status of
the server until you create the test profile on the device.
When you delete a test profile, the device stops detecting the status of the RADIUS servers that use
the test profile.
Examples
# Configure a test profile named abc for RADIUS server status detection. A detection packet that
uses username admin and plaintext password abc123 is sent every 10 minutes.
<Sysname> system-view
[Sysname] radius-server test-profile abc username admin password simple abc123 interval
10
Related commands
primary authentication (RADIUS scheme view)
secondary authentication (RADIUS scheme view)

reset radius statistics

Use reset radius statistics to clear RADIUS statistics.
Syntax
reset radius statistics
Views
User view
Predefined user roles
network-admin
mdc-admin
Examples
# Clear RADIUS statistics.
<Sysname> reset radius statistics
Related commands
display radius statistics
reset stop-accounting-buffer (for RADIUS)
Use reset stop-accounting-buffer to clear buffered RADIUS stop-accounting requests to which no
responses have been received.
Syntax
reset stop-accounting-buffer { radius-scheme radius-scheme-name | session-id session-id |
time-range start-time end-time | user-name user-name }
Views
User view
Predefined user roles
network-admin
98