HP FlexNetwork 7500 Series Command Reference Manual page 133

Table 10 Command output
Field
Index
Primary Auth Server
Primary Author Server
Primary Acct Server
Secondary Auth Server
Secondary Author Server
Secondary Acct Server
Host name
IP
Port
State
VPN Instance
Single-connection
NAS IP Address
Server Quiet Period(minutes)
Realtime Accounting
Interval(minutes)
Stop-accounting packets buffering
Retransmission times
Response Timeout Interval(seconds)
Username Format
Data flow unit
Packet unit
Description
Index number of the HWTACACS scheme.
Primary HWTACACS authentication server.
Primary HWTACACS authorization server.
Primary HWTACACS accounting server.
Secondary HWTACACS authentication server.
Secondary HWTACACS authorization server.
Secondary HWTACACS accounting server.
Host name of the server.
This field displays Not configured in the following situations:
•
The server is not configured.
•
The server is specified by IP address.
IP address of the server.
This field displays Not configured in the following situations:
•
The server is not configured.
•
The server is specified by hostname, and the hostname is not
resolved.
Service port of the HWTACACS server. If no port configuration is
performed, this field displays the default port number.
Status of the HWTACACS server: active or blocked.
MPLS L3VPN instance to which the HWTACACS server or scheme
belongs. If no VPN instance is specified for the server or scheme,
this field displays Not configured.
Single connection status:
•
Enabled—Establish only one TCP connection for all users to
communicate with the server.
•
Disabled—Establish a TCP connection for each user to
communicate with the server.
Source IP address for outgoing HWTACACS packets.
Quiet period for the primary servers, in minutes.
Real-time accounting interval, in minutes.
Whether buffering of nonresponded HWTACACS stop-accounting
requests is enabled.
Maximum number of transmission attempts for individual
HWTACACS stop-accounting requests.
HWTACACS server response timeout period, in seconds.
Format for the usernames sent to the HWTACACS server:
•
with-domain—Includes the domain name.
•
without-domain—Excludes the domain name.
•
keep-original—Forwards the username as the username is
entered.
Measurement unit for data flows.
Measurement unit for packets.
118