Table of Contents
Advertisement
Do not configure the same IPv6 address and MPLS L3VPN for different portal authentication
servers.
Examples
# Configure the IP address of IPv6 portal authentication server pts as 2000::1 and the plaintext key
as portal.
<Sysname> system-view
[Sysname] portal server pts
[Sysname-portal-server-pts] ipv6 2000::1 key simple portal
Related commands
display portal server
portal server
nas-port-type
Use nas-port-type to specify the NAS-Port-Type value carried in RADIUS requests sent to the
RADIUS server.
Use undo nas-port-type to restore the default.
Syntax
nas-port-type value
undo nas-port-type
Default
The NAS-Port-Type value carried in RADIUS requests is 0.
Views
MAC binding server view
Predefined user roles
network-admin
mdc-admin
Parameters
value: Specifies the NAS-Port-Type value in the range of 1 to 255.
Usage guidelines
Some MAC binding servers identify MAC-based quick portal authentication by a specific
NAS-Port-Type value in received RADIUS requests. To communicate with such a MAC binding
server, you must configure the device to use the NAS-Port-Type value required by the MAC binding
server.
Examples
# Set the NAS-Port-Type value in RADIUS requests sent to MAC binding server mts to 30.
<Sysname> system-view
[Sysname] portal mac-trigger-server mts
[Sysname-portal-mac-trigger-server-mts] nas-port-type 30
Related commands
display portal mac-trigger-server
262
Advertisement
Table of Contents
