HP FlexNetwork 7500 Series Command Reference Manual page 252

Field
Portal status
Portal authentication method
Portal Web server
Portal mac-trigger-server
Authentication domain
Pre-auth domain
User-dhcp-only
Pre-auth ip-pool
Max Portal users
Bas-ip
Bas-ipv6
User detection
Action for server detection
Layer3 source subnet
Destination authentication
subnet
IP address
Mask
Prefix length
Related commands
portal domain
Description
Portal authentication status on the interface:
•
Disabled—Portal authentication is disabled.
•
Enabled—Portal authentication is enabled.
•
Authorized—The portal authentication server or portal Web server
is unreachable. The interface allows users to have network access
without authentication.
Authentication mode enabled on the interface:
•
Direct—Direct authentication.
•
Redhcp—Re-DHCP authentication.
•
Layer3—Cross-subnet authentication.
Name of the portal Web server specified on the interface.
Name of the MAC binding server specified on the interface.
Mandatory authentication domain on the interface.
Preauthentication domain for portal users on the interface.
Status of the user-dhcp-only feature:
•
Enabled—Only users with IP addresses obtained through DHCP
can perform portal authentication.
•
Disabled—Both users with IP addresses obtained through DHCP
and users with static IP addresses can pass authentication to get
online.
Name of the IP address pool specified for portal users before
authentication.
Maximum number of portal users allowed on an interface.
BAS-IP attribute of the portal packets sent to the portal authentication
server.
BAS-IPv6 attribute of the portal packets sent to the portal authentication
server.
Configuration for online detection of portal users on the interface,
including detection method (ARP, ICMPv6, ND or ICMP), detection
interval, maximum number of detection attempts, and user idle time.
Portal server detection configuration on the interface:
•
Server type—Type of the server. Portal server represents the portal
authentication server, and Web server represents the portal Web
server.
•
Server name—Name of the server.
•
Action—Action triggered by the result of server detection. This field
displays fail-permit when the portal fail-permit feature is enabled.
Information of the portal authentication source subnet.
Information of the portal authentication destination subnet.
IP address of the portal authentication subnet.
Subnet mask of the portal authentication subnet.
Prefix length of the IPv6 portal authentication subnet address.
237