Port-Security Mac-Address Aging-Type Inactivity - HP FlexNetwork 7500 Series Command Reference Manual

Predefined user roles
network-admin
mdc-admin
Parameters
blockmac: Adds the source MAC addresses of illegal frames to the blocked MAC address list and
discards frames with blocked source MAC addresses. This action implements illegal traffic filtering
on the port. A blocked MAC address is restored to normal after being blocked for 3 minutes, which is
not user configurable. To display the blocked MAC address list, use the display port-security
mac-address block command.
disableport: Disables the port permanently upon detecting an illegal frame received on the port.
disableport-temporarily: Disables the port for a period of time whenever it receives an illegal frame.
You can use the port-security timer disableport command to set the period.
Usage guidelines
To restore the connection of the port disabled by the intrusion protection feature, use the undo
shutdown command.
Examples
# Configure Ten-GigabitEthernet 1/0/1 to block the source MAC addresses of illegal frames after
intrusion protection detects the illegal frames.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] port-security intrusion-mode blockmac
Related commands
display port-security
display port-security mac-address block
port-security timer disableport

port-security mac-address aging-type inactivity

Use port-security mac-address aging-type inactivity to enable inactivity aging for secure MAC
addresses.
Use undo port-security mac-address aging-type inactivity to disable inactivity aging for secure
MAC addresses.
Syntax
port-security mac-address aging-type inactivity
undo port-security mac-address aging-type inactivity
Default
The inactivity aging feature is disabled for secure MAC addresses.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
mdc-admin
320