Reset Attack-Defense Statistics Local - HP FlexNetwork 7500 Series Command Reference Manual

Parameters
policy-name: Specifies an attack defense policy by its name. The policy name is a case-insensitive
string of 1 to 31 characters. Valid characters include uppercase and lowercase letters, digits,
underscores (_), and hyphens (-).
ip: Specifies protected IPv4 addresses.
ipv6: Specifies protected IPv6 addresses.
statistics: Clears flood attack detection and prevention statistics.
Examples
# Clear flood attack detection and prevention statistics for protected IPv4 addresses in attack
defense policy abc.
<Sysname> reset attack-defense policy abc flood protected ip statistics
# Clear flood attack detection and prevention statistics for protected IPv6 addresses in attack
defense policy abc.
<Sysname> reset attack-defense policy abc flood protected ipv6 statistics
Related commands
display attack-defense policy ip
display attack-defense policy ipv6

reset attack-defense statistics local

Use reset attack-defense statistics local to clear attack detection and prevention statistics for the
device.
Syntax
reset attack-defense statistics local
Views
User view
Predefined user roles
network-admin
mdc-admin
Examples
# Clear attack detection and prevention statistics for the device.
<Sysname> reset attack-defense statistics local
Related commands
display attack-defense statistics local
reset blacklist ip
Use reset blacklist ip to clear dynamic IPv4 blacklist entries.
Syntax
reset blacklist ip { source-ip-address [ vpn-instance vpn-instance-name ] | all }
Views
User view
577