Ipv6 Nd Raguard Apply Policy - HP FlexNetwork 7500 Series Command Reference Manual

Examples
# Specify medium as the router preference match criterion for the RA guard policy policy1.
<Sysname> system-view
[Sysname] ipv6 nd raguard policy policy1
[Sysname-raguard-policy-policy1] if-match router-preference maximum medium

ipv6 nd raguard apply policy

Use ipv6 nd raguard apply policy to apply an RA guard policy to a VLAN.
Use undo ipv6 nd raguard apply policy to remove the RA guard policy from a VLAN.
Syntax
ipv6 nd raguard apply policy [ policy-name ]
undo ipv6 nd raguard apply policy
Default
No RA guard policy is applied to a VLAN.
Views
VLAN view
Predefined user roles
network-admin
mdc-admin
Parameters
policy-name: Specifies an RA guard policy by its name, a case-sensitive string of 1 to 31 characters.
If you do not specify a policy, RA guard blocks RA messages on all interfaces in the VLAN except
interfaces that are defined to be connected to routers.
Usage guidelines
If an RA message has multiple VLAN tags, RA guard uses the outermost VLAN tag to select the
applied RA guard policy.
If the specified RA guard policy does not exist, the command does not take effect.
Examples
# Apply the RA guard policy policy1 to VLAN 100.
<Sysname> system-view
[Sysname] vlan 100
[Sysname-vlan100] ipv6 nd raguard apply policy policy1
Related commands
ipv6 nd raguard policy
ipv6 nd raguard log enable
Use ipv6 nd raguard log enable to enable the RA guard logging feature.
Use undo ipv6 nd raguard log enable to disable the RA guard logging feature.
Syntax
ipv6 nd raguard log enable
650