Table of Contents
Advertisement
sha2-512 } | prefer-kex { dh-group14-sha1 | ecdh-sha2-nistp256 | ecdh-sha2-nistp384 } |
prefer-stoc-cipher { aes128-cbc | aes128-ctr | aes128-gcm | aes192-ctr | aes256-cbc |
aes256-ctr | aes256-gcm } | prefer-stoc-hmac { sha1 | sha1-96 | sha2-256 | sha2-512 } ] *
[ { public-key keyname | server-pki-domain domain-name } | source { interface interface-type
interface-number | ip ip-address } ] * [ user username [ password password ] ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
server: Specifies a server by its IPv4 address or host name, a case-insensitive string of 1 to 253
characters.
port-number: Specifies the port number of the server, in the range of 1 to 65535. The default is 22.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the server belongs.
The vpn-instance-name argument represents the VPN instance name, a case-sensitive string of 1 to
31 characters.
get: Downloads the file.
put: Uploads the file.
source-file-name: Specifies the name of the source file, a case-sensitive string of 1 to 255
characters.
destination-file-name: Specifies the name of the target file, a case-sensitive string of 1 to 255
characters. If you do not specify this argument, the target file uses the same file name as the source
file.
identity-key: Specifies a public key algorithm for publickey authentication of the client. The default is
dsa in non-FIPS mode and is rsa in FIPS mode. If the server uses publickey authentication, you
must specify this keyword. The client generates the digital signature or certificate by using the local
private key that is associated with the specified algorithm.
•
dsa: Specifies the public key algorithm dsa.
•
ecdsa-sha2-nistp256: Specifies the ECDSA algorithm with 256-bit key strength.
•
ecdsa-sha2-nistp384: Specifies the ECDSA algorithm with 384-bit key strength.
•
rsa: Specifies the public key algorithm rsa.
•
x509v3-ecdsa-sha2-nistp256: Specifies the public key algorithm
x509v3-ecdsa-sha2-nistp256.
•
x509v3-ecdsa-sha2-nistp384: Specifies the public key algorithm
x509v3-ecdsa-sha2-nistp384.
•
pki-domain domain-name: Specifies the PKI domain of the client's certificate. The
domain-name argument is a case-insensitive string of 1 to 31 characters. When the x509v3
public key algorithm is used, you must specify this option for the client to get the correct local
certificate.
prefer-compress: Specifies the preferred compression algorithm for data compression between the
server and the client. By default, compression is not supported.
zlib: Specifies the compression algorithm zlib.
prefer-ctos-cipher: Specifies the preferred client-to-server encryption algorithm. The default is
aes128-ctr. Supported algorithms are des-cbc, 3des-cbc, aes128-cbc, aes128-ctr, aes128-gcm,
aes192-ctr, aes256-cbc, aes256-ctr, and aes256-gcm, in ascending order of security strength and
computation time.
469
Advertisement
Table of Contents
