Dot1X Quiet-Period - HP FlexNetwork 7500 Series Command Reference Manual

Examples
# Configure Ten-GigabitEthernet 1/0/1 to implement port-based access control.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x port-method portbased
Related commands
display dot1x

dot1x quiet-period

Use dot1x quiet-period to enable the quiet timer.
Use undo dot1x quiet-period to disable the quiet timer.
Syntax
dot1x quiet-period
undo dot1x quiet-period
Default
The quiet timer is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
When a client fails 802.1X authentication, the device must wait a period of time before it can process
authentication requests from the client. You can use the dot1x timer quiet-period command to set
the quiet timer.
Examples
# Enable the quiet timer and set the quiet timer to 100 seconds.
<Sysname> system-view
[Sysname] dot1x quiet-period
[Sysname] dot1x timer quiet-period 100
Related commands
display dot1x
dot1x timer
dot1x re-authenticate
Use dot1x re-authenticate to enable the 802.1X periodic reauthentication feature.
Use undo dot1x re-authenticate to disable the 802.1X periodic reauthentication feature.
Syntax
dot1x re-authenticate
undo dot1x re-authenticate
193