Display Port-Security Mac-Address Block - HP FlexNetwork 7500 Series Command Reference Manual

Field
Free VLANs
Open authentication

display port-security mac-address block

Use display port-security mac-address block to display information about blocked MAC
addresses.
Syntax
display port-security mac-address block [ interface interface-type interface-number ] [ vlan
vlan-id ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
vlan vlan-id: Specifies a VLAN by its ID. The value range is 1 to 4094.
count: Displays only the count of the blocked MAC addresses.
Usage guidelines
If you do not specify any parameters, this command displays information about all blocked MAC
addresses.
Examples
# (In standalone mode.) Display information about all blocked MAC addresses.
<Sysname> display port-security mac-address block
MAC ADDR
000f-3d80-0d2d
--- On slot 1, 1 MAC address(es) found ---
--- 1 mac address(es) found ---
# (In standalone mode.) Display the count of all blocked MAC addresses.
<Sysname> display port-security mac-address block count
--- On slot 1, 1 MAC address(es) found ---
--- 1 mac address(es) found ---
Description
VLANs in which packets will not trigger authentication.
If you do not configure free VLANs, this field displays Not
configured.
Whether open authentication mode is enabled on the port.
Port
XGE1/0/1
311
VLAN ID
30