Nas-Ip (Hwtacacs Scheme View) - HP FlexNetwork 7500 Series Command Reference Manual

Hide thumbs Also See for FlexNetwork 7500 Series:
Table of Contents

Advertisement

<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] key authentication simple 123456TESTauth&!
# Set the shared key to 123456TESTautr&! in plaintext form for secure HWTACACS authorization
communication.
[Sysname-hwtacacs-hwt1] key authorization simple 123456TESTautr&!
# Set the shared key to 123456TESTacct&! in plaintext form for secure HWTACACS accounting
communication.
[Sysname-hwtacacs-hwt1] key accounting simple 123456TESTacct&!
Related commands
display hwtacacs scheme

nas-ip (HWTACACS scheme view)

Use nas-ip to specify a source IP address for outgoing HWTACACS packets.
Use undo nas-ip to delete the source IP address of the specified type for outgoing HWTACACS
packets.
Syntax
nas-ip { ipv4-address | ipv6 ipv6-address }
undo nas-ip [ ipv6 ]
Default
The source IP address of an outgoing HWTACACS packet is that configured by using the hwtacacs
nas-ip command in system view.
If the hwtacacs nas-ip command is not configured, the source IP address is the primary IP address
of the outbound interface.
Views
HWTACACS scheme view
Predefined user roles
network-admin
mdc-admin
Parameters
ipv4-address: Specifies an IPv4 address, which must be an address of the device. The IP address
cannot be 0.0.0.0, 255.255.255.255, a class D address, a class E address, or a loopback address.
ipv6 ipv6-address: Specifies an IPv6 address, which must be a unicast address of the device and
cannot be a loopback address or a link-local address.
Usage guidelines
The source IP address of HWTACACS packets that a NAS sends must match the IP address of the
NAS that is configured on the HWTACACS server. An HWTACACS server identifies a NAS by IP
address. Upon receiving an HWTACACS packet, an HWTACACS server checks whether the source
IP address of the packet is the IP address of a managed NAS.
If the source IP address of the packet is the IP address of a managed NAS, the server
processes the packet.
If the source IP address of the packet is not the IP address of a managed NAS, the server drops
the packet.
125

Advertisement

Table of Contents
loading

Table of Contents