HP FlexNetwork 7500 Series Command Reference Manual page 69

Default
No local users exist.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
user-name: Specifies the local user name, a case-sensitive string of 1 to 55 characters. The name
must meet the following requirements:
•
Cannot contain a domain name.
•
Cannot contain any of the following characters: forward slash (/), backslash (\), vertical bar (|),
colon (:), asterisk (*), question mark (?), left angle bracket (<), right angle bracket (>), and at
sign (@).
•
Cannot be a, al, or all.
class: Specifies the local user type. If you do not specify this keyword, the command adds a device
management user.
manage: Device management user that can configure and monitor the device after login. Device
management users can use FTP, HTTP, HTTPS, Telnet, SSH, and terminal services.
network: Network access user that accesses network resources through the device. Network
access users can use LAN access, portal, and ONU services.
guest: Guest that can access network resources through the device during a specific validity period.
Guests can use LAN and portal services.
all: Specifies all users.
service-type: Specifies the local users that use a specific type of service.
ftp: FTP users.
http: HTTP users.
https: HTTPS users.
lan-access: LAN users that typically access the network through an Ethernet, such as 802.1X users.
onu: ONU users.
portal: Portal users.
ssh: SSH users.
telnet: Telnet users.
terminal: Terminal users that log in through console ports.
Examples
# Add a device management user named user1 and enter local user view.
<Sysname> system-view
[Sysname] local-user user1 class manage
[Sysname-luser-manage-user1]
# Add a network access user named user2 and enter local user view.
<Sysname> system-view
[Sysname] local-user user2 class network
[Sysname-luser-network-user2]
54