Ip Verify Source Exclude - HP FlexNetwork 7500 Series Command Reference Manual

# Enable IPv4SG on Layer 3 Ethernet interface Ten-GigabitEthernet 1/0/2 and verify the source IPv4
address and MAC address for dynamic IPSG.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/2
[Sysname-Ten-GigabitEthernet1/0/2] ip verify source ip-address mac-address
# Enable IPv4SG on Layer 3 Ethernet interface Ten-GigabitEthernet 1/0/2 and verify the source MAC
address for dynamic IPSG.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/2
[Sysname-Ten-GigabitEthernet1/0/2] ip verify source mac-address
Related commands
display ip source binding

ip verify source exclude

Use ip verify source exclude to exclude IPv4 packets with the specified source items from IPSG
filtering.
Use undo ip verify source exclude to remove the specified excluded source items.
Syntax
ip verify source exclude vlan start-vlan-id [ to end-vlan-id ]
undo ip verify source exclude vlan start-vlan-id [ to end-vlan-id ]
Default
No excluded source items are configured.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
vlan start-vlan-id [ to end-vlan-id ]: Specifies excluded VLANs. Value ranges for both the start-vlan-id
and end-vlan-id arguments are 1 to 4094. The value for the end-vlan-id argument must be equal to or
greater than the value for the start-vlan-id argument. A single excluded VLAN is specified if you
specify only the start-vlan-id argument or specify the same VLAN ID for the start-vlan-id and
end-vlan-id arguments.
Usage guidelines
This command allows all IPv4 packets with the specified source items to be forwarded without being
processed by IPSG.
You can execute this command multiple times to specify multiple excluded VLANs. The specified
excluded VLANs cannot overlap.
Examples
# Exclude IPv4 packets from VLAN 3 and VLAN 5 through VLAN 10 from IPSG filtering.
<Sysname> system-view
[Sysname] ip verify source exclude vlan 3
[Sysname] ip verify source exclude vlan 5 to 10
612